Step 1:     Lift up the panel surrounding the gear shifter and disconnect wires. Set aside. Flip gently out the small blind panel above the radio.

Step 2:     Unscrew the 2 bolts below and under the radio/heather unit and the one in top of the center console above the radio.

Step 3:     Pull out the radio/heater assembly and mount the Dash Mount on the 2 10mm bolts securing the radio on the left side of radio side wall.

Step 4:     Push the unit back into position and reassemble in reversed run.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket