Step 1:     Take out the ashtray assembly and remove the Torx screws behind, next to the cig.lighter.

Step 2:     Flip out the small grille cover next to the ignition switch and remove the screw. Unclip the cover around the lighter first.

Step 3:     If you need to hide cabling for the hands free etc. you might need to remove (Optional) the panel completely. Then lift up the lid behind gear shifter. Unscrew the 2 screws and lift up. Disconnect wires and unscrew the 2 nuts behind the gear panel. You can now remove the whole centre console panel by unclipping.

Step 4:     Tilt out the upper right corner of the centre console panel and remove the 2 bolts right hand side the radio. Locate the Dash Mount by accessing it in behind the panel from the radio opening.

Step 5:     Reinstall the 2 bolts after aligning Dash Mount on to the locating tab. Tighten properly.

Step 6:     Reinstall all parts in reversed direction.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket