71077 MITSUBISHI GRANDIS



1. Unclip the panel housing the gear selector.

2. Slide down to access and remove the two Philips screws behind the panel.

3. Unclip the main fascia panel, and loosen the bolts securing the left air vent, that are on the rear of this panel.

This will detach from display screen and storage tray section.

5. Separate the vent from the panel by a few mm.

5. Hook the bracket behind the vent via this recess and hold tightly against the side trim whilst refitting the bolts.
(The bracket arm will locate via the two recesses in the arm , with both the bolt and the guide arm on the vent.)

6. Refit the panels in reverse.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket