71179 NISSAN MICRA 2003>

NB You must fit the cradle to the DashMount prior to installation. The shortest usable screws will be required and you must omit locating one in the lower left corner of the cradle.

1. Unclip the central blanking plate above the digital display.

2. Remove the upper right hand Philips screw.

3. Carefully lever forward the upper edge of the panel.

4. Locate the bracket behind the panel and refit the screw. Push the trim back into place.

5. Refit the blanking plate.

NB Only applicable to cars WITHOUT covered storage tray.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket