
![]() |
![]() |
| Pre 2005 Model | 2005 Model on |
Nissan
Primera 2002 - 71229
1. Open the glove compartment and remove the four screws in the upper front
trim.
2. Lever the assembly out some 3-4cm in the upper right hand corner.
3. Insert the short arm between the console and the heater unit trim.
4. Insert the longer arm behind the assembly locating it in the recess.
5. Hold it tightly
in position to the right, and refit the assembly and screws.
Dashmount
will not be liable for any damage caused to a vehicle in executing the fitting
of the bracket