71214 Mercedes CLK W209 2002>

1. Open the ashtray.

2. Unclip the gear shift gaiter from the front section: pull up and slide back.

3. Remove the ashtray insert by unclipping the two retaining tabs at the front.

4. Remove the two Torx 20 screws at the base of the console and lever the trim forwards.

5. Locate the bracket with the screw and guide pin to the left of the heater matrix.

6. Refit the fascia, screws, ashtray and gaiter trim.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket