71001


1. Remove the ashtray and the two support screws in the recess that secure the framework.

2. Remove the screw caps in each corner of the radio and the grub screws beneath.

3. Remove the radio and cage.

4. To release the fascia panel, depress the steel lever in the upper rear centre of the radio recess, and pull the framework forwards.

5. Grip the bracket around the left edge of the fascia at ashtray level.

6. Push the panel back into place to secure in place.

7. Adhere the double sided tape to the console edge to prevent vibration.

8. Refit the radio cage, radio, ashtray and screw fixings.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket