>08 Model	08> Model

PEUGEOT 307 - 71291

1. Open the ashtray and remove the two torx 20 screws in the recess.

2. Using a flat bladed tool with great care, unclip the climate
control/heater panel starting in the upper corners.

3. Remove the two torx screws beneath the radio.

4. Lever out the lower left corner of the fascia below  the radio by some
20mm.

5. Locate the arm with left hand screw removed at step three by sliding the
bracket behind the upper fascia trim.

6. Refit the screws, fascia trim and astray.

When refitting the fascia trim, the U shaped steel clip on the guide tab of the climate control trim may require reshaping as it mal forms upon removal'

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket