71529 - Land Rover Freelander up to 31/10/03

Step 1;     Remove the heater control knobs by pulling straight out.

Step 2;     Unscrew 2 phillips screws located under the knobs and take the panel out.

Step 3;     Unscrew 2 screws securing the control unit on the right side. Install the Dash Mount on these 2 screws. Secure properly.

Step 4;     Re-install panel in reversed direction and your Dash Mount installation is completed.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket