711098 NISSAN MURANO RADIO MOUNT

Step 1:Unclip the plastic trim panels beneath each side of the audio unit.

Step 2: Lever up the vent assembly above the audio unit: remove the two Phillips screws securing the radio framework.

Step 3:Remove the Phillips screw on each side of the lower radio framework.

Step 4:Disconnect the aerial/power feeds.

Step 5:Insert the bracket from the rear, between the radio fascia and the black console surrounds at the volume control dial level.

Step 6:Locate the bracket with the lower sunken screw on the side of the audio unit.

Step 7. Refit all parts.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket