711012 VW FOX/CROSSFOX

1: Remove the radio and storage tray if fitted.

2: Remove the 2 Torx screws in the rear of the radio recess.

3: Unclip the switch blanks above the radio and the 2 Torx screws behind.

4: Remove the Torx screw centrally at the base of the fascia panel.

5: Depress the the two plastic trims in the radio recess and lever out this trim.

6: Insert the upper arm in the top slot of the left air vent.

7: Locate the lower arm with Torx screw beneath the vent assembly.

8: Refit all parts

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket