71228 VW Polo ' 02> (This bracket can be positioned either side)

1. Remove the radio and unclip the storage tray beneath.

2. Unclip the heather control panel and the rectangular switch blank above and to the right.

3. Remove the Torx T15 screw in the radio recess, one each side of the heater controls and one in the right hand side of the console.

4. Ease the fascia out from the base by some 15-20mm.

5. Slide the bracket into the recess and pull upwards to align next to the switch panel.

6. Refit the screws, trim, radio and storage tray.