71117 - Nissan Tino 2004>

1. Remove the Philips screw to the left of the bonnet release.

2. Remove the Philips screw under the dash trim to the right of the radio unit.

3. Unclip the fascia, pulling out from the ledge in front of the screen

4. Twist the unit aside, locate the bracket with the two screws to the left of the climate control / radio unit: ensure the bracket is located in front of the plastic support moulding. See right hand picture above

5 Refit the fascia around the bracket so that it emerges in the aperture to the left of the climate control / radio unit. To overcome intolerance loosen the two screws on the right hand side of the unit.

6. Refit all parts in reverse.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket