711314 KIA CARENS 07>

Step 1: Unclip the gear shift trim and set aside.

Step 2: Remove the two screws in the recess securing the heater control panel.

Step 3: Unclip the fascia panel by pulling straight out from the vent assembly area.

Step 4: Locate the bracket with ethe lower screw and guide pin securing the radio.

NB For cars that do not have factory nav you will need to transfer the screw in the top left corner of the recess to the lower location.

5. Refit the trim.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket