711100 MAZDA BT50 2007>

Step 1: Remove the two outer heater control dials.

Step 2: Remove the Phillips screws in each recess, securing the panel .

Step 3: Unclip the complete fascia unit using a trim tool along the edge of the unit. Pull out from the base.

Step 4: Locate the bracket with the lower left Phillips screw on the head unit .

Step 5: Slide the unit and bracket back in to position and refit the screws and dials.

NB This bracket will alternately fit on the right hand screw.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket