1. Remove the two screws above the radio housing.

2. Lever out, as far as possible, the lower panel of the radio assembly.

3. Remove the two screws in the underside of the upper moulding.

4. Remove the two screws under the upper lip of the instrument binnacle and also the screw to the to the top left of the radio.

5. Unclip the whole fascia.

6. Locate the bracket with the two screws in the recess to the left of the heater controls.

7. Refit all parts in reverse.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket