AUDI A3 ' 01> Console Mount


1. Unclip the heater control panel using a flat bladed tool. Pull outwards from the lower section and set to the right.

2. Locate the bracket with the screw in the left of the heater recess.

3. Refit the heater control panel.

CLIMATE CONTROL

1. Unclip the radio surrounds.

2. Remove the radio.

3. Remove the two screws either side of the head unit.

4. Remove the 8mm bolts if fitted at the base of the climate control or unclip via the four brass retaining clips. the ACC unit can then be removed by pushing from the rear via the radio recess.

5. Locate the bracket with the screw in the left of the recess.

6. Refit the trim.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket