TOYOTA VERSO

TOYOTA YARIS

1. Remove the right and left hand heater control switches.

2. Remove the two screws behind.

3. Unclip the fascia trim starting in the lower corners.

4. YARIS Remove the screw in the left storage tray in the upper corner and the screw below the fascia panel.
VERSO Remove the screw in the storage tray only.

5. YARIS Locate the bracket's smaller arm with these screws and align it with the guide pin.
VERSO There is no screw in the far left hole and a self tapping is required to fit in the same way as the Yaris.

6. Refit the screws, fascia and switches.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket