Step 1:Remove the heater controls and all of the screws behind

Step 2 : Remove the screw cap cover and screw beneath to the right hand side of the panel

Step 3 : Lever the fascia away at the glove box side and remove the screw beneath to enable the panel to be removed fully.

Step 4 : Locate the bracket with the screws and plastic grommets in the right hand side of the recess next to the steering wheel, one screw with the top set of holes in the long arm,  plastic grommet with the middle set and the lower screw with the elliptical screw at the base

Step 5 : Replace all screws and trim to secure

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket