70328 NISSAN ATLEON 2000-

Lhd

Location : Right side of bank of switches

Tools required : Philips screwdriver, MTU bendingtool

Step 1: Start by unclipping the panelframe surrounding the switch knobs. Use a piece of cloth around the bendingtool to protect the plastic.

Step 2: Unscrew the Phillips-screw in the right upper corner and lift out the ear

so much that you can locate the Dash Mount arm behind there.

Step 3: Reinstall the screw and tighten properly. The dual-sided tape is now stuck to

the top-edge of dashpad.

Step 4: Put the panel back into position.