Step 1: Remove the radio in the upper section of the dashboard with the Gamma radio Tools.

Step 2: Remove the two torx 20 screws in the upper part of the recess.

Step 3: Unclip the climate control fascia trim utilising a flat bladed tool together with a protective cloth to prevent damage to the panel.

Step 4: Remove the four torx screws securing the heater matrix unit, and pull the unit out.

Step 5: Remove the two screws securing the console fascia

Step 6: Gently lever the panel outwards and locate the bracket with the left hand screw in step 5

Step 7: Refit the screws, trim and radio.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket