70353 Oldsmobile Aurora 2001

Right side of climate control

Flat bending tool, 9/32 socket with driver

Step 1: Begin by removing the trim bezel that surrounds the climate control and radio. Insert flat bending tool at the lower right corner and pry out. This bezel is clipped in. Continue all the way around until it is unclipped. Place the bezel to the side.

Step 2: Remove the 9/32 screw to the right of the climate control. Position the Dash Mount over this hole and the support tab and replace the factory screw.

Step 3: Reassemble the trim bezel in reverse order.