71646- Toyota 4 Runner 96 / Surf

Step 1: Pull out the 4 small knobs on the heater control and use a flat object to pop out the display plate. In the upper left and lower right corner you will find 2 screws that you remove. The trim-panel surrounding the gear shifter must be unclipped by pulling straight upwards and now you can pull out the hole dash panel.

Step 2: At the right side of the cigar lighter there is one screw on which you install the Dash Mount.

Step 3: It may be necessary to bend the mount slightly to the right when you reinstall the panel and complete and reassemble in reversed direction.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket