Step 1: Remove the entire panel surrounding the instrumentation and air-condition controls. (Secured by strong clips) To the top right you will find a 10mm bolt.

Step 2:Remove this bolt and put it through the hole of the Dash Mount arm and retighten well.

Step 3: Pop the panel back into position and make sure that the Dash Mount comes out of the gap next to the radio. If a heavy phone is installed, it might be necessary to secure the Dash Mount with an additional self-tapping screw through the extra hole in the arm.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket