Step 1: Use a pair of Radio-DIN tools to remove the radio. Open the centre console storage lid and remove the 2 screws holding the trim around the gearshift. Remove this trim and then remove the two 7mm bolts that are holding the trim around the radio.

Step 2: Now remove the 2 screws above the instrumentation and pull this panel out about 3 inches. Pop out the panel around the radio enough so that you access the 2 bolts to the right of the radio.

Step 3: Install the Dash Mount on these 2 screws and tighten well.

Step 4: Replace all screws, panels and radio.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket