Step 1: Remove the long trim piece that runs horizontally from the steering column across and around the radio. This is held by strong clips and can be removed by inserting a flat object between the dash and the trim panel. Start in one end. The climate control will come out with the trim and you should disconnect the wiring.

Step 2: Remove the screw to the lower right hand corner of radio. Push the Dash Mount in next to the dash padding and pull slightly back, so that the bottom hole of the Dash Mount lines up over the radio screw hole.

Step 3: Replace and tighten the screw properly. Reconnect wires and remount all parts. We recommend you to protect the panel from scratches with masking tape when popping out the panel.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket