71396 - DAF XF95 1988 - 2002

Step 1: Unscrew and remove the 2 screws on the right side of console panel.

Loosen the 2 ones to the left. Lift the panel out some 1-inch on the right Hand side.

Step 2: Remove protective foil on the tape on the Dash Mount and then enter the arm with the hole in behind the upper right corner. The screw hole in panel must align with the hole in the arm. Insert the screw through the hole to help you in this.

Step 3: Push panel back into position and adjust the Dash Mount so that the second arm with tape rest on the front fascia. Insert the last screw and tighten all.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket