70391- Chevrolet Impala 2000 - 2005

Step 1: Begin by loosening trim bezel that surrounds the radio and climate control. To do this, start at the passenger side and remove the fuse panel on the side of the dash. Remove the 9/32 screw at the top of this bezel. Next, remove the two 9/32 screws at the top the instrument cluster. Starting with the right side of the bezel on the passenger side, gently pull bezel out. This bezel is held by clips. Do not remove completely, only enough to get mount in place.

( Note: Use extreme caution not to scratch trim bezel during installation.)

Step 2: Next, Remove the screw to the right of the climate control. Position the Dash Mount over this hole and replace factory screw.Tighten well.

Step 3: Reassemble dash trim bezel in reverse order.

 

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket