71060 Range Rover ES RT Side

Step 1: Remove the panel beneath the steering column with six screws (see figure).

Step 2: Remove the two screws securing the right hand trim panel of the transmission tunnel.

Step 3: Lever this panel forwards at the top and locate the bracket arm with screw immedatly to the left of the clock and recess tray.

Step 4: Hook the rear arm over the lip of the recess for stability adding double sided tape if required.

Step 5: Replace all screws and trim to secure in place.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket