Step 1:    Remove the screws from the dash board (3 or 5, depending of the car model).

Step 2:    Remove the dash board panel.

Step 3:    A 7mm screw will appear to the left.

Step 4:    Remove the screw.

Step 5:    Place the screw into the hole in the "Dash-Mount and fasten the screw in the original screwhole.

Step 6:    The other hole in the "Dash-Mount" fits the screw hole to the left in the panel.

Step 7:    Replace the panel, and fasten the screws.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket