70371

Pontiac Bonneville 2000-

Right side of climate control

10mm socket and ratchet

Step 1: Begin by pulling back the trim bezel that surrounds the climate control. This is clipped on. Start with the lower right side of the bezel and pull. There is no need to remove completely.The trim ring that surrounds the key may pop off. It clips back on.

Step 2: Remove the 10mm screw to the right side of the climate control. Position the Dash Mount over this hole and replace the factory screw. Tighten well.

Step 3: Reaasemble the trim bezel in reverse order.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket