Car with standard radio.

Step 1: Remove the radio and the radio frame. Inside the radio opening you find two nuts, one on each upper corner, which you remove. Now you can pull out the frame which is clipped on in the lower part.

Step 2: Locate the Dash Mount over the hole on the left side and and replace the cover.

Step 3: Replace the nuts, the radio frame and the radio.

Car with original Peugeot radio.

Step 1: Remove the radio. Locate the Dash Mount over the holes on the left side and fasten with a bolt and a nut. Insert the radio.

 

 

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket