nb please specify near
side or off side option when ordering
NISSAN TERRANO 2 R20 '99>
1. Remove the gear shift trim
which is clipped in place. Take care as the upper clips will dislodge.
2. Remove the screws to each
side of the main fascia panel.
3. Remove the radio with the
appropriate radio tools.
4. Unclip the panel housing the
radio and hazard warning switch.
5. Remove the Philips screw in
each corner of the recess.
6. Remove the ashtray and the
two screws in the opening.
7. Lever the trim forwards and
locate the bracket with upper left screw and locating tab.
8. Refit the trim in reverse
order.
Dashmount
will not be liable for any damage caused to a vehicle in executing the fitting
of the bracket
