71457 Volvo S80 Vent - Right

Step 1:     Tilt the steering wheel into the lowest position.

Step 2:    Ply out the central moulding carefully, with a flat bladed tool, starting on the right side adjacent to the binnacle.

Step 3:    Insert the lower arm of the bracket behind the lower edge of the moulding and grip the left arm around the right edge of the vent assembly and insert the right arm into the gap in the binnacle housing trim until it grips in place.

Step 4:    Refit the moulding.

(NB Heavier installations may require an extra self tapping screw through the lower arm's holes).

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket