MAZDA 2 Sept 07>

Step 1: Unclip the gear shift surround and lift up.

Step 2: Remove the bolts in the lower section of the transmission trim and set aside.

Step 3: Open the glove box and lever forward the adjacent right hand trim panel.

Step 4: Locate the bracket with two retaining clips on this panel and refit in one motion.

Step 5: Refit all parts.

NB Use a self tapping screw for added stability via the hole between the two clip recesses

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket