Step 1:     Remove the radio and storage tray beneath.

Step 2:    Unclip the fascia panel around the heater controls and the three heater switches (or climate control panel on vehicles fitted with air con).

Step 3:    Remove the six screws as indicated, two behind the heater controls and four in each corner of the fascia.

Step 4:    Unclip the plastic surrounds of the console in one piece.

Step 5:    Locate the bracket with the screw in the left of the recess at the radio level.

Step 6:    Refit the trim surrounds, the screws, fascia panel and switches and then the radio and storage tray.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket