Step 1:     Remove the radio.

Step 2:    Lever up the upper panel surrounding the clock display starting from the front and pulling slightly up and towards you.

Step 3:    Remove the two torx 15 screws up and behind this panel.

Step 4:    Remove the panel by unclipping around the radio and heater controls.

Step 5:    Locate the bracket with the torx screw in the upper left corner of the heater assembly recess.

Step 6:    Refit the screws, panels and radio.

Bracket arm modified to allow seating of fascia panel

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket