711067 FORD FUSION 2006>

1. Remove the Ford radio with the Ford removal keys: disconnect the aerial and harness and set aside.

2. Remove the Torx 20 screw in the centre of the rear of the housing beneath the radio.

3. Remove the two Phillips screw in either side of the radio recess.

4. Unclip the vented blanking plate and the the two switches on the top of the fascia panel.

5. Remove the Phillips screws behind each.

6. Unclip the complete one piece fascia panel taking care not to detach the ACC/heather wiring from the rear. Three are two speed clips on the lower ledge.

7. Locate the bracket with the left hand Phillips screw in the radio recess.

8. Refit all parts.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket