74045 Toyota Landcruiser 90 1997

Step 1: Unclip the centre consolepanel by pulling straight out. Start at lower edge and use a flatbladed bendingtool. The 2 clips at the top is harder to release, but pry firm and gently.

Step 2: Remove the protective foil from the dual-sided tape.

Step 3: Locate the Dash Mounts hooked arm over the airvent. duct and place the arm over the front edge. The tape stick on to the panel below the airgrids.

Step 4: Push the panel back into position together with the Dash Mount.

 

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket