74029 Seat Alhambra 2001 / Volkswagen Sharan 2001

Step 1: Open the glovebox lid and remove the 2 Torx screws at the rear of the hatch.

Step 2: Use a thin flat screwdriver in the 2 slots on the outboard side of Torx screws. There are 2 clips to release and you must push the screwdriver-handle towards the windshield. Lift so the boxliner up at the rear and slide it somewhat to the windshield.

Step 3: Locate the Dash Mount on the left airvent. duct and use a self-tapping screw true the plastic. It’s important to pull the Dash Mount towards you when doing this. Stick the dual-sided tape to the front below the airventgrid.

Step 4: Reinstall the liner and the glovebox lid.

 

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket