74024 Volvo 70 series 2001

Step 1: Unclip the centre airvent. assembly by pulling straight out. Unscrew the torx T25 that appears in the left lower part of the air duct.

Step 2: Push the Dash Mounts lower arm with the 2 holes in between the upper edge of the centre console-panel and the upper part of the dashboard. The hole will align with the torx screw. Mount the screw. The Torx screw is accessible with the screwdriver slide through the hole in the Dash Mount.

Step 3: Then you must carefully slide the airvent assembly in between the 2 arms of the Dash Mount . Push the assembly and the upper arm of Dash Mount in together so that the clips are gripping.

 

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket