Step 1:     Tilt the steering column to the lower position and remove the two screws located beneath the panel below the instrument cluster.

Step 2:    Remove the screw to the left of the steering wheel in the trim adjacent to the air vent.

Step 3:    Lever the dashboard fascia outwards at the upper level and hook the bracket over the edge.

Step 4:    Ensuring that the bracket is drawn down fully into place and the tape is adhered to the fascia, locate the other arm with the right hand screw.

Step 5:    Refit the fascia and screws.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket