71175 Vauxhall Meriva

Step 1 - Open the glovebox. Unscrew 2 philips-screws securing the dash-moulding above the opening. These screws are pointing straight up

Step 2 - With caution this moulding is now to be eased out with help of a thin bendingtool. It is dipped on and you should start in the passenger corner.

Step 3 - Remove the screws securing the airvent assembly. Pull this some 10mm out and hook the wide arm above it and locate sideways so that the small arm with the hole aligned with the screw on drivers side. Push the assembly into place.

Step 4 - Refit the parts in reversed order.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket