71239 Seat Alhambra 2000>

1. Open the storage tray and remove the two Torx screws to the rear.

2. Insert a screwdriver into the slots either side of these Torx positions. Release the clips by levering the screwdriver towards the screen. Lift the tray out from the rear sliding it towards the screen.

3. Hook the bracket over the top of the right vent and adhere the tape to the lower section of the assembly.

4. Refit the tray and screws.

NB Use a self tapping screw via the top arm of the bracket through the inner vent trim to give added stability as required.