Step 1:     Remove the radio utilising the standard DIN keys.

Step 2:     Unclip the panel around the gear shift

Step 3:     Unclip the panel around the radio

Step 4: Remove the screw to the left of the storage tray ( mainly to facilitate radio muting) and the two screws securing the radio assembly.

Step 5: Locate the bracket under the plastic lip with these two screws.

Step 6: Refit the fascia panel, radio and trim.

NB '00> Cars do not require the radio or storage tray to be removed and they also have a 1mm soft guide pin between the radio screws. Fit the bracket directly onto the two screws depressing this pin.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket