71649 - Ford Ka / Street Ka

Step 1: Remove the radio by using the DIN tools and disconnect the wiring.

Step 2:    Remove the phillips screw in upper central edge of the radio recess.

Step 3:    Hook the upper arm of the bracket over the curved edge of the dash fascia and locate the other arm with the screw in the radio recess.

Step 4:    Depending on how proud this locating hole is relevant to the screw it may be necessary to shave away approximately 5mm of the inner plastic in front of the screw. This will not be visible of course when the radio is replaced.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket