Step 1:     Remove the radio utilising the DIN tools and set aside. REMEMBER SECURITY CODE  

Step 2:    Remove the ashtray and the square cover around the cigar lighter.

Step 3:    Remove two posi screws in the lower corners.

Step 4:    Remove the left blanking plate or switch on the assembly above the heater controls and Torx 20 screw behind.

Step 5:    Lever out the panel at the top via the clips and the second Torx 20 behind.

Step 6:    Locate the bracket with this screw ensuring that it also aligns with the first screw behind the switch.

Step 7:    Reassemble all parts in reverse procedure.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket